Inspection & Controls
X-Ray Inspection Systems
X-ray inspection finds metal, glass, ceramic, stone, bone, shell and hard plastic inside packed or loose product, and it is unaffected by temperature, moisture, salt or metallized film. The same image is also used for product checks — filling quantity, missing components, internal voids — so contamination and quality defects are judged in one pass. Pure supplies the inspection station, its reject handling and the conveying either side of it as part of the line, with a model chosen around your pack format, line speed and the defects you need to catch.
X-ray inspection finds metal, glass, ceramic, stone, bone, shell and hard plastic inside packed or loose product, and it is unaffected by temperature, moisture, salt or metallized film. The same image is also used for product checks — filling quantity, missing components, internal voids — so contamination and quality defects are judged in one pass. Pure supplies the inspection station, its reject handling and the conveying either side of it as part of the line, with a model chosen around your pack format, line speed and the defects you need to catch.
Ideal applications
- Retail packed food
- Bulk product before packaging
- Bottled, jarred and canned product
- Meat, poultry and fish processing
- Baked and filled products
- Pharmaceutical and chemical packs
Package & product types
- Pouch
- Container
- Tray
- Stick Pack
- Jar
- Bottle
- Case
- Nuts
- Salads
- Meat / Fish
- Vegetables / Fruits
- Drinks
- Coffee / Tea
- Seeds
Key capabilities
- Foreign-body detection in packed and loose product
- Product defect and filling verification from the same image
- Guided product learning for new SKUs
- Automatic reject with confirmation
- Inspection records for retailer and audit requirements
Typical line integration
- Placed after filling and sealing, or before packaging for bulk product
- Reject station and confirmation handling
- Upstream and downstream conveying
- Line controls, recipe selection and data capture
Models & Configurations
Additional x-ray inspection systems models
Each model is configured around a different pack format, product state or defect type. Open a model for its full specification.
Packed Product Inspection — Standard
The core packed-product range, with five aperture sizes covering small retail packs through large cases.
Learn More
Packed Product Inspection — TDI High Resolution
High-resolution TDI detector for faster lines and smaller defects than the standard packed range.
Learn More
Packed Product Inspection — Basic
Entry-level packed inspection with a tall aperture for bagged and boxed product.
Learn More
Vision & X-Ray Combination Inspection
Visible-light and X-ray imaging in one machine — seal contamination plus foreign-body inspection.
Learn More
Bulk Product Inspection
Inspects loose product on a wide belt before packaging, with array-valve rejection of individual pieces.
Learn More
Bottle, Jar & Can Inspection
Tall-aperture inspection for upright containers conveyed on belt or chain plate.
Learn More
Bottle & Jar Inspection — Dual View
Two synchronized X-ray views remove the blind spots a single view leaves in upright containers.
Learn More
Fish Bone Detection
Dual-station fish inspection with large operator screens for manual bone removal at the line.
Learn More
Baked Goods Inspection
Foreign-body detection plus filling and internal-defect checks for filled baked products.
Learn More
Bone Detection — Dual Energy
Dual-energy imaging for bone fragments and cartilage in poultry and red meat before packaging.
Learn More
Broken Needle Detection for Pork
Whole-carcass-section inspection that separates broken needles from bone and soft tissue.
Learn More
Customized Inspection
Application-specific defect detection built around your product when a standard recipe is not enough.
Learn MoreRelated Machines
Technologies that pair with this machine
These sections commonly sit beside this machine in a Pure line.
Inspection & ControlsVision Control & Inspection Systems
Vision, verification and control systems that protect quality through the line.
Learn More
Secondary PackagingLabeling Systems
Wrap-around, top, bottom and C-wrap labeling with coding integration.
Learn More
End of LineComplete Turnkey Packaging Solutions
A complete line engineered, integrated, tested and supported as one system.
Learn MoreX-Ray Inspection Systems — Questions & Answers
What is a X-Ray Inspection Systems?
Foreign-body and product-defect inspection for packed, bulk, bottled and further-processed product.
What package formats can the X-Ray Inspection Systems handle?
The X-Ray Inspection Systems is used with pouch, container, tray, stick pack, jar and bottle formats. Share your exact package specification with Pure to confirm fit.
What products can be packed on the X-Ray Inspection Systems?
Typical products for the X-Ray Inspection Systems include nuts, salads, meat / fish, vegetables / fruits, drinks, coffee / tea and seeds.
Which industries use the X-Ray Inspection Systems?
The X-Ray Inspection Systems is used in Bakery & Biscuits, Food & Dairy, Pre Made Meals, Pet-Food, Fresh Cut & Vegetables, Coffee and Meat & Poultry applications.
What options are available for the X-Ray Inspection Systems?
Available options for the X-Ray Inspection Systems include aperture size matched to the pack, reject device: pusher, air blast, drop flap or array valve, dual view or dual energy imaging, vision and X-ray combination inspection, array injection valve for bulk piece-level rejection and wi-Fi / 4G remote support connectivity.
Can the X-Ray Inspection Systems integrate into a complete packaging line?
Yes. The X-Ray Inspection Systems integrates with placed after filling and sealing, or before packaging for bulk product, reject station and confirmation handling, upstream and downstream conveying and line controls, recipe selection and data capture.
How do I get a quote for a X-Ray Inspection Systems?
Use the Request a Quote form or Discuss Your Project to share your product, package format, target speed and facility constraints. Pure will outline how this machine fits your line.
Have a x-ray inspection systems application?
Share your product, package format, target speed and facility constraints. Pure will outline how this technology fits your line.
Talk to an engineer
Describe your application and get a practical answer on fit, speed and integration.
Discuss Your ProjectSend us your package
Upload drawings, photos or samples details with your RFQ so we can scope the right configuration.
Start an RFQBuild my line
See how this machine fits into a complete line from infeed through palletizing.
Build My Line